View Single Post
  #35  
Old 24-06-2016, 05:10 PM
wasyoungonce's Avatar
wasyoungonce (Brendan)
Certified Village Idiot

wasyoungonce is offline
 
Join Date: Jul 2006
Location: Mexico city (Melb), Australia
Posts: 2,336
Luka...the case for Cam85m "Faddy" is the G106. From the case machine drawings, it has 25mm inside height clearance from inside base to inside top of lid. The PCB sits on a base land, 10mm up from base. Guessing a PCB thickness of 2mm, this leaves 13mm for component height (maximum)?

Do you agree? I need to have this in agreement as I am finding it difficult to find capacitors of suitable dia and height to those specified. I can substitute longer caps if the clearance mentioned is correct.

Specifically:
I can find C5; C6; C9; C10 (6mm diax 7mm H).
I Cannot find height suitable for C11 (330uf, 10V), looks to be 6 dia x ~9 h (I can only find 11mm h caps).
I Cannot find suitable for C8, 220uf 25V, 6 dia x 9 h (can only find 6.3 d x 11 h).
I Cannot find suitable for C47, 47uf 25V, 5 dia x 8 h (can only find 6 d x 7 h).

Lastly it is difficult to find any ICs: CXD1267AN apart from fleabay. I have some coming from UTSource, but given the parts I just got from them...I have doubts on them.
Reply With Quote