View Single Post
  #107  
Old 23-05-2016, 04:13 PM
glend (Glen)
Registered User

glend is offline
 
Join Date: Jun 2013
Location: Lake Macquarie
Posts: 7,033
Thanks guys. Colin they (Cyclops Optics in Hong Kong) have already configured it for usb for me. When i was chatting to their helpline about the order they asked me about the camera i would be using and how i would control. When i opened the plastic housing this afternoon to change the jumper for usb, i found it was already setup by them. Pretty good sevice i think. I have a copy of the manual as well. Those little spacers and screws are confusing but it turned out all i needed was the 2mm screws and its spacer for my Baader filters.

I have the camera and filter wheel joined up now. The distance from the rear of the T-adaptor to the sensor is under 55mm, so my scope focuser setup for the old DSLR will still work perfectly. I don't particularly like the long screws that they supplied with the filter wheel for the clamp but they will do for now. At least with that setup I can separate them easily. I might power it up tonight, or at least see if I can get the wheel to operate.
Attached Thumbnails
Click for full-size image (DSCF1382.jpg)
148.2 KB48 views
Click for full-size image (DSCF1384.jpg)
135.1 KB35 views

Last edited by glend; 23-05-2016 at 04:36 PM.
Reply With Quote