|
Thanks again guys. John, I was able to drive the mount in goto mode last night from my macpro using Equinox Pro a USB / Serial converter connected to the serial port, which is a round 6-pin port on the mount labled "PC".
As for the autoguiding... I'm thinking that there are two generations of EM-400 Temma2 mounts. I have seen several pictures of these mounts with a round 6-pin port labled autoguider, which would fit the cable that Paul shows here. My mount has a small unique port labled autoguider which fits the cable that John linked to and I have attached a photo of. I'll take a photo of the ports on the mount but I'm finding some older mounts have a different configuration.
Rob
|