View Single Post
Old 01-09-2020, 07:09 AM
Registered User

Hemi is offline
Join Date: Dec 2010
Location: Darwin
Posts: 400
Hi Malcolm,

I used to use the 2 device method. It seems youíre doing everything correctly.
SynScan pro connects Device A to the mount.
Sky safari connects Device B to device A. You input device A ip/port to the connection settings in sky safari.
All devises must be on same network or connecting to the skywatcher WiFi adapter.
I canít remember if in skysafari I put the scope type as Meade lx200 classic. But it might be worth a try. safari 6 pro solves this, and only one device is needed. I can confirm that, as thatís how Iím setup now.

Good luck, but either way does work.

Reply With Quote