Mirror Support Upgrade
Due to the quality of my images deteriorating slowly over several months I started looking for the cause. It appeared to be a mirror problem although I was unable to find anything that looked wrong. I removed the mirror to check the supports however everything looked okay. When I reassembled it the images looked even worse so I had found the problem but how to fix it I was unsure. After trying several things including removing the numerous supports underneath and replacing them with s/s the problem was still apparent. Thinking it was perhaps the wire edge supports I renewed them with no success. The only solution was to replace everything with an 18 point whiffletree design and a new designed edge support. I am pleased to say it has performed perfectly since the upgrade has been completed .
Regards, Phil
|