Thanks guys.
Alpal you don't have to re calibrate after the meridian flip if you have the correct set up. This is the part that I don't understand I can't understand if it's the camera that won't swap/read calibration data after the meridian flip or the software.
Mat from Software Bisque is saying that the camera I'm using does not support reversing the y axis, but surely it's the software that would do the reversing. Calibration is only camera angle and how far the star will move in arc sec for a given relay pulse.
Also I have a pendulum set up on RA axis so I am always east heavy.
David I'm pretty sure with ccdap you don't need to tell the mount what side the scope is on, but I could be wrong.
|