|
Rod,
The bottom piece of glass is held in place by the wooden blocks that were glued lightly around their periphery to both the rotary table and the glass, with epoxy resin. After the job was done, I used a wood chisel to carefully get rid of the wood and free the glass. I had to be careful not to let the epoxy to seep under the glass and permanently attach it to the table. After the epoxy had set, I ground the top flat and used double sided mounting tape to attach the second piece of glass on top. When the top one was done, I used a hacksaw blade to cut through the mounting tape and free the top piece. Hope that make sense.
|