Quote:
Originally Posted by peter_4059
Or intentionally misalign it slightly so it is always correcting dec in one direction.
|
Would that be an Altitude or Azimuth misalignment?
Quote:
Originally Posted by Tony_
Hello Colin,
I have a CGEM mount with a similar problem (although it doesn't have belts). In my case the backlash is in the motor itself. My autoguider can switch off dec control in either direction. I always switch off one direction so that it only corrects for drift - this solved the backlash problem.
Regards,
Tony.
|
I should probably double check that it isn't the motor causing the issue. It is an issue that only started AFTER I decided to strip the mount down and clean it so I know it is something that I have caused, now I want to make it go away
