Quote:
Originally Posted by Todo43
I find that the guiding settle ALWAYS fails. If that timeout is too short, I wouldn't know. Worked in PHD2 before
|
Same here, guiding settle fails.
Looking at the graphs it does seems like you have backlash in both RA and Dec. However, since it ran ok in PHD2 it may be just that the guiding rate is set too low on the Asiair.
Take a look at
East Wind Astrophotography blog
It covers the full setup of the Asiair guiding and parameter selection.
It could be worth forgetting the PHD2 settings and follow this blog post to setup the Asiair guiding. Maybe that will make a difference.
Chris