View Single Post
Old 02-10-2017, 07:05 AM
Baza (Barry)
Registered User

Baza is offline
Join Date: Mar 2014
Location: Heathcote NSW
Posts: 82
If that is the linear bearing material, the 10mm that I have appears to be case hardened which is softer steed in the centre.
There used to be a case hardening powder which was sprinkled on the red hot steel then quenched at an appropriate temp. the temp was established by colour. It requires polishing the red hot steel so the cooling colour change is apparent. It is no longer cheap

This link may be useful
Reply With Quote