http://i39.photobucket.com/albums/e1...ps0eiwzt3b.jpg
Hi all,
Hopefully someone may be able to help?
I'm trying...again...to get everything to happily work together but PHD2 won't cooperate.
The main hardware I'm using:
1. NEQ6 with EQMOD and William Optic 132
2. 50mm guide scope with ZWO290MC
The software is:
1. ASCOM and EQMOD. Pulse guiding is checked
2. Cart du Ceil
3. PHD2
I have the ZWO connected to the computer and the the computer to the mount with the Shoestring DB9 plug.
I can see the star image in PHD2 but cannot get enough movement west after 60 or so iterations. In the PHD2 manual it says to take manual control to check the mount is talking to PHD2 but that doesn't work either. I've checked the calibration data and increases the duration of the pulse but no luck.
Am I missing something here? Does anyone haven advice please as I'm feeling frustrated after several days on just this issue.
regards
Geoff
PS why do I see the image in preview but only as a link in the actual thread?