View Single Post
  #9  
Old 22-12-2019, 04:44 PM
The_bluester's Avatar
The_bluester (Paul)
Registered User

The_bluester is offline
 
Join Date: Feb 2011
Location: Kilmore, Australia
Posts: 2,376
If you have CCD inspector that is a good option but you can get a pretty decent handle on it visually as well.

Seems that for most correctors (Sensor spacing on a RASA seems to be the opposite) if you have radial streaks (Warp speed0 in the corners the sensor is too close to the sensor, if you have arcs (Fishbowl) it is too far away.
Reply With Quote