View Single Post
  #9  
Old 03-08-2020, 08:53 PM
kens (Ken)
Registered User

kens is offline
 
Join Date: Oct 2014
Location: Melbourne, Australia
Posts: 295
Your guide log shows your setup parameters are way off.
I would use the EQMOD driver rather than the Skywatcher driver. You will need to install that first. In EQMOD set the guide rate to 0.5 as the default is way too small
In PHD2, create a new profile from scratch. Choose as the mount EQMOD ASCOM HEQ5/6
Create your darks library
Choose a star near Declination 0 and well above the horizon and calibrate.
Run the guiding assistant for 10 minutes or so and accept its recommendations
Reply With Quote