Quote:
Originally Posted by Rerouter
.. I'm suspecting your also thinking of removing the solenoids as well, if so that would make things harder as it will be some delay circuit between the solenoid pulse and I believe a home switch on the top shutter...
|
Hi Ryan,
yes, my plan is to remove all mechanics..
Erwin Lotter's
Arduino design takes care of those delays from sensors, so no need for solenoids etc.
There is also a discussion about it on
CN, here.
There is a suitable plastic box (
Jaycar, HB0101), 158 x 95 x 53mm, so I can try to repack the whole thing inside, including Peltier cooler etc..