|
Thanks for the reply and information, that has helped heaps, all starting to make a bit of sense to me now slowly.
Is it possible that you can help me out with just a few other little issues i have in regards to setting it up in a imaging plan as it appears a bit different from a DSLR
In the imaging plan you have the exposure, bin, gain, offset, pause, count.
I was mainly trying to work out the Gain and offset settings.
I take it that you just leave the offset at 50, but not sure about the gain, do i just set this at either 0 or 100, so just set the gain to 0
Then there is that box in the lower right hand corner called object name, in there you have Bulb seconds and gain, do i also just put the gain as 0 in there as well, and for the bulb seconds is this just really how long it takes an exposure for when plate solving?
All information is appreciated.
Thanks.
|