Quote:
Originally Posted by Octane
All I initially noticed that when the focuser was sitting in the supplied bracket, when turning the focus knob, the whole assembly would oscillate up and down. H
|
Ahhh, now that makes sense.
My focusor on the TSA worked its way loose too and wiggled a lot. You need to take off the cover plate and then tighten the screws inside the focusor; just so it is snug.
That looseness allows the focusor to slip slightly and I think it must be a common problem with Tak focusors. The focusor should not wiggle up and down after you adjust things but should still move relatively easily.
You a step of 1 too. I use that and with a sample of 10. Focus time is about 1 min 40 secs.