Quote:
Originally Posted by spiezzy
Hi there Simon and Dave congrads on your new PODs you will love them .
I am going to give this ago and drill a series of hole from the inside and just spray a bit at a time until the section is filled I will use a Fuller space filler type of foam not as much pressure tried it in a empty plastic bottle the trick is not to let air build up so if I drill a hole in the bottom of the dome section (there are 4) and drill a hole in the top this should push any air out until full .
the walls of the sections are quite thick approx 3 mm or more so I will let you know how it goes all the best for Chrissy
cheers Pete
|
Hi Pete,
I would still proceed with caution on this process. As Phil stated Wayne is against doing this.
As it's only hot for a few months and depending where you live . I'm lucky living nearer the coast and get sea breezes so cooler than inland.
I had thoughts on hotter days on putting a cover over the Pod something like this !
https://www.bunnings.com.au/marquee-...azebo_p3190700
Also obviously to vent the Pod with this combination I think this could work.
Thoughts?
Dave