Quote:
Originally Posted by trent_julie
Hi Solitarian,
My washers are made with a polycarbonate. I don't have any Acetal here at home. I am hunting down Acetal sheets now. I think the biggest problem would be getting the thickness you want locally. Ebay has 1.5mm but it comes from the states.
|
Finding the assortment of thicknesses will be the hard part.
The thrust washers under the worm gear are also shims for proper meshing of the worm drive. Those washers' sizes are the critical ones.
The thickness of the thrust washers above the worm drive on the Dec, only seem to change the gap between the collar and the mount.