Hi Peter,
I'd check the config in Maxim and just make sure everything looks configured correctly (sorry if you've done this three times already!) You should be able to make the carousel turn just by selecting a different filter in Maxim - you don't need to take an image. I have USB problems with my FW sometimes and this is an easy way to test it.
Might also be worth cranking up a different capture software package if you have one. The simpler the better (IIRC, there's a small SBIG utility?) If it can drive the FW then that points to a Maxim issue. If it doesn't that points to a HW issue.
Cheers,
Rick.
|