View Single Post
  #22  
Old 14-06-2016, 07:08 PM
luka's Avatar
luka
Unregistered User

luka is offline
 
Join Date: Apr 2007
Location: Perth, Australia
Posts: 1,164
We only need to get enough parts from Mouser to get to $60. The rest can come from RS. But the part at Mouser shows "not in stock, call to quote"... it does not sound too good.

Now I have been thinking about making the PCB again. We do have the gerbers and images of the PCB... retracing the tracks may not be too time consuming...

edit: clicked post instead of preview

If we would to design our own (and it looks like it is only two of us and you can do Eagle and I can do Altium), did you have a look at cam85? I did not bother reading the details as it is work in progress but it fixes few issues that cam84 has. So partially incorporating those fixes could be beneficial. And we could make the housing smaller, cam84 has lots of "wasted" space as it was made to fit a pre-selected enclosure.

Last edited by luka; 14-06-2016 at 07:23 PM.
Reply With Quote