Thread: [SOLD] QHY183C OSC Camera - BNIB
View Single Post
  #1  
Old 03-06-2019, 07:30 PM
LucasB (Lucas)
Registered User

LucasB is offline
 
Join Date: Jul 2011
Location: Melbourne
Posts: 357
QHY183C OSC Camera - BNIB

Hi Everyone,

I have for sale a brand new QHY183C OSC Camera. I have only connected to a laptop to test indoors. It was purchased from Gama Electronics in December 2018 so it still has 6 months local warranty and a further 12 months direct with QHY. It has a 20MP Sony IMX183 Back Illuminated Sensor, 2.4 micron pixels for high res imaging and very low read noise.

It has 2 stage TEC and cools to -40°C below ambient.

It comes with all cables and the manufacturers power supply with the screw connection for the 12V DC connector.

Asking for $950 pick up or $990 shipped Australia wide with insurance.

Cheers,
Lucas

Camera specs:

CMOS Sensor: Sony IMX183 Back Illuminated Sensor
Color or Monochrome: Color
Effective Pixels: 5544 x 3694
Pixel Size: 2.4um x 2.4um
Effective Area: 13.3mm x 8.9mm
Shutter: Electric Rolling Shutter
Full Well Capacity: 15,000 - 16000e
Readout Noise: 2.7e@low gain, 1e@high gain
Exposure Time: 50us-3600sec
AD Sample Depth: 10bit/12bit (8bit/16bit output, MSB Alignment)
On Camera Image Buffer: Yes, 128MB DDRII Buffer
Cooling: 2-stage TEC, Typical -40 below Ambient, Temperature Regulated
Power: USB Powered for camera and +12V powered for TEC
Anti Dew Control: Air Connector for removable silicon gel tube. Heat board for optic window of sealed CCD chamber
Computer Interface: USB3.0 Super Speed
Telescope Interface: M42/0.75 & 2inch adapter. Optional C-mount adapter
Color Wheel Port: 4PIN QHYCFW2 socket
Guide Port: 6PIN RJ11 Guide Port
Optic Window: IR+AR
Weight: 450g/15.87 ounces
Electric Interface: 12V input with lock, USB3.0 socket, 4PIN QHYCFW, 6PIN RJ11
Attached Thumbnails
Click for full-size image (QHY183C_IIS.jpg)
171.9 KB46 views

Last edited by LucasB; 07-06-2019 at 06:19 PM.