Need Anti-reflection advice on custom part
I have a beautifully made custom part to attach a TAK TOA-67 to my ONAG XT with absolute minimum back focus. I would have had Ashley make it but he did not have the inside thread size for the 67FF. Thus, I used a local shop to insure a perfect fit. Using the inside vs outside threads saved ca 4 mm of BF.
The aluminium part needs to be anodized or painted. I noticed that Ashley's anodizing is quite anti-reflective compared to the polished look on the outside. I'm not at all sure if a local anodize job would be able to do this so I'm thinking about painting. Anyone know of the proper paint? Other ideas?
Thanks!
Peter
|