|
I have a photo that shows the device well, but unfortunately it is a large
file, and I no longer have a downsizing programme on my comp, and it
is refusing to download anything. I have posted a photo which was taken
at a different angle so that the device is only seen side on. The piece of flat bar is bent over 90 degrees at the rear of the scope with a piece of teflon stuck to the inside of the bend so the scope turns easily, and the paint doesn't get damaged. Worked fine for me for over four years. You can get a slightly
better idea of it if you magnify your screen until just before the photo starts to pixellate
raymo
|