Quote:
Originally Posted by Mickoid
. The filter is basically connecting/holding the camera to the OTA, which as the manual states, is not the place to put it but how do I fit the filter in front of the flattener?
|
The filter should not be holding any weight at all or connecting anything together - I think you've got it in the wrong position. The filter screws into the telescope side of the T-ring adapter, then the adapter is screwed onto the flattener, then T-ring then camera. So the filter is between the parts where the red arrow is pointing.
That's how it is on my Esprit 80 anyway, I assume the 100 has a similar setup.