Quote:
Originally Posted by SuperG
Hmm I'm still at a loss here. The RJ12 cable has 6 pins on both ends. The first one I used only had two. I still cannot get any movement with manual control. I'm using the ASI ST4 ASCOM driver. I assume this is correct.
|
Hi - 6 pins doesn't automatically confirm 6 wires - you should be able to confirm by looking at the rj12 crimp and seeing the six wires in the channels behind the pin connections.
You can also note the straight through or twisted status of the cable by the colours in the channels at each end - hope I'm making sense
Eg -
http://www.store.shoestringastronomy...ort_cables.pdf