Quote:
Originally Posted by Shiraz
yep, if you use ST4 you need an ST4 cable (I think it has crossed over wiring) to connect between the camera ST4 output and the mount ST4 input. You select "on camera" in phd and you don't need ASCOM.
Alternatively, you can pulse drive the mount using ASCOM, in which case you need to feed RS232 signals from a USB converter on your computer to the mount through the handset (in PC direct mode) or if the RS232 converter provides low voltage RS232, you can feed it directly into the mount via the handset socket. This is explained on the EQMOD site.
|
Thanks Ray. I then assume that the RJ12 I have is not sending the signals from the ZWO to the correct pins on the SYNSCAN unit then. I think the ST4 option sounds the simplest but finding an ST4 cable may be hard if the connections cross over from end to end. still confused here.