Quote:
Originally Posted by multiweb
Does the adapter replace the nosepiece/filter all together (i.e. you open the box and expose the sensor) or do you fit it on top of the existing filter? Sorry if this sound like a stupid question, I'm totally new to filters, adapters and what not.
|
Marc, always assume the filter is permanetly mounted.
The only time you will ever remove the filter is to clean the sensor or replave the filter with another filter, eg. UVIR Block to clear filter.
The filter has a T thread on the front so you can mount accesories to it.
I too use a MPCC and use a spacer from the Meade f3.3 reducer kit.
Although you can get spacer kits of many different lengths, their may be someone there that is not using one of theirs from their own kit that may sell one.
Theo.