|
Problems with PHD mount connection?
Another two steps forward and one step back. Trying to get PHD working with my ZWO ASI130MM guide camera. The camera works fine, and the image is appearing in PHD just fine. All the setup is as per my Net research uncovered. PHD doesn't connect to the mount (NEQ6). I have installed ASCOM Platform 6.1 . I have the drivers provided by ZWO, and have the ST4 cable on from the camera port to the NEQ6. I have also tried selecting the "On Camera" ST4 connection, and that didn't work either. Anyone using a ZWO camera as a guide cam I'd appreciate your guidance.
Last edited by glend; 22-06-2014 at 11:13 PM.
|