Thread: EQ6 Hypertune
View Single Post
Old 24-02-2010, 05:59 AM
bojan's Avatar

bojan is offline
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 6,339
That looks bad.
Either the worm shaft is bent (that would explain one sticky spot) or the worm is damaged (couple of bumps on threads) or (less likely) you have hard particles/dirt in grease which are now pressed into worm surface.
Is this happening at every position of the worm gear (I know.. you have to turn it 140 times to find out. If yes, at least you know the gear is OK)
Anyway, all this will result in increased periodic error,
Reply With Quote