|
hi,
I put the copy of my message sent to the Ukrainian for a few tests:
I have not yet received my cxd1267 but I mounted the Cam to do the cooling test.
For me the PMW is not good:
Test 1
Cam, fan and TEC powered with 7.5 V, PWM CAM86= -12 ° C under ambient temperature in 6 minutes, and is very long to go up after the capture
Test 2
Cam, fan 12 V and TEC 5.7 V, PWM CAM86 = -15 ° C under ambient temperature in 4 minutes and is very long to go up after the capture
Test 3
Cam, fan 12 V and TEC 5.7 V, no PWM (bang bang per switch) = -22 ° C under ambient temperature in 2 minutes and goes up very quickly after stop of 3 seconds
I think we should try for assembly as me:
1 / PWM 100% until good temperature and 60% after and during capture
if not good:
2 / BANG BANG (1-0)
|