View Single Post
  #315  
Old 12-01-2018, 06:35 PM
Baza (Barry)
Registered User

Baza is offline
 
Join Date: Mar 2014
Location: Heathcote NSW
Posts: 82
I have a 10" blank after being pointed to Andrews.
I've started grinding but seem to be stuck at 3.18mm, I am looking to go to about 6mm which should be around F3. Full size glass tile tool in use which has gone from 8 mm to about 5.5 mm thick. Just pushing across the blank with about 60% cover.
Any suggestion about getting to 6mm appreciated.
Barry
Reply With Quote