|
Bit more of an undate.
I have most of the roof on now but have to make a few changes. I need to cut the 3 longest lenghts of roofing, (the middle length and the ones left and right of the openings) so they end at the opening. Then raise the short pieces to match the pitch of the peices at the north end of the openings. Then I'll attach some marine ply around the opening giving me a 100mm lip all the way around the opening. I will use flashing to make it water proof. The roll off sections will close up against this lip on the northern end where the roof of the roll off section will over hang 200-300 mm all around.
Here are a couple more pics showing the roof before amendments.
Cheers
|