Quote:
Originally Posted by GOTO
Hi all,
I hope someone can shed some light on this for me please?
http://i39.photobucket.com/albums/e1...psyiqa7ubj.jpg
When I connect the EFW to the OAG the prism is at an angle ~40degreees to the CMOS chip but in every picture I see of the setup it is orthogonal.
Ive included a second image to show the rather odd angles involved from a greater distance.
http://i39.photobucket.com/albums/e1...psf4iqi63i.jpg
I would have thought everything should have been in the same plane?
Cheers and thanks
Geoff
PS Sorry I'm not sure why the photos show up in the preview but not the post itself?
|
Hi Geoff,
I have the same EFW and OAG and EFW. I had the same issue and used the adapter in the below link to resolve this issue. I have also added a photo for reference.
By the way the 3 prong adapters will give you about 15 degrees of adjustment. I just used the adapter to get close and then adjusted the on the prongs to get exact alignment.
https://www.bintel.com.au/product/bi...-locking-ring/