Quote:
Originally Posted by synthguy2
Hi, I'm doing some early planning on upgrading my telescope. At the moment I'm using an old Orion Telescope and Binocular ED-80 Apo on a Televue Gibraltar Mount, but have ordered a Skywatcher AZ-GTi to give me a basic and highly portable GOTO mount for visual use only. The ED-80 weighs in about 3.7kg, with a 1.25" diagonal and a 50mm finder, so that should work as a grab-and-go GOTO solution.
The real conundrum is a new telescope for 2021. I want something around 8" in aperture - either a Newtonian or an SCT, on a GOTO mount, with wifi capability, and it would initially be for visual use, but with the aim to get into astro-imaging. Having flexibility for other OTAs down the track would be good - it was one reason why I discounted the Celestron Evolution in the end.
I've looked at a bunch of different mounts - Celestron AVX looks a good all round solution, but at 13.6kg capacity, it limits my options in terms of OTA; Skywatcher EQ-6R Pro gives me loads of payload capacity but looks a much heavier mount to manage; and I've also considered the Skywatcher AZ-EQ5 GT-P, which looks a little more manageable than the EQ-6 Pro with about 5kg less capacity. Ideally, I'd like to add in Starsense for whichever mount I get, and WIFI either integrated or added-on so I can control everything from a mobile device, or a laptop.
I'm not wanting to be overly ambitious on astro-imaging. My observing location is suburban Canberra, and I have a street light shining into my patio, so its far from ideal, but looking anywhere but north is not too bad. I want a quick setup, so I don't spend all night dealing with gear problems.
I am not looking at spending anything more than about $3800 max. So I'd welcome any advice on my options. Right at the moment I'm stuck in 'analysis paralysis' mode so I felt it was time to hear what other people are thinking. I'd be purchasing in April.
|
Malcom, I've an 8" newt on heq5pro that you're more thsn welcome to come and spend time with. If anything, it may end up ruling out a strictly eq mount for visual use with a newt that size... i dont have rotating rings and find it a bit of a pain compared to the alt az mounts.
Have you taken a look at the azeq6 gt from sky watcher and saxon. A fair bit lighter weight head than the eq6r, same payload, usable in alt az mode with both your 8" and 80mm and can be had from a tick under 3k, leaving 600 for an 8" newt and 200 for a coma corrector. Skywatcher wifi dongles are available for these mounts