Hi Malcolm,
I used to use the 2 device method. It seems you’re doing everything correctly.
SynScan pro connects Device A to the mount.
Sky safari connects Device B to device A. You input device A ip/port to the connection settings in sky safari.
All devises must be on same network or connecting to the skywatcher WiFi adapter.
I can’t remember if in skysafari I put the scope type as Meade lx200 classic. But it might be worth a try.
Lastly.....sky safari 6 pro solves this, and only one device is needed. I can confirm that, as that’s how I’m setup now.
Good luck, but either way does work.
Hemi
|