AZGTi saddle
I never liked the AZGTi saddle so i thought hmmm if i remove this and bolt this on i will have a non marring saddle.
I removed the tin cover inside the clamp that hides 4 screws removed the clamp.
I dug out a saddle from the spare parts box and i had 3 but 2 had pre-drilled holes in the centre that didn’t line up with the AXGTi mount holes but the ADM saddle had no pre-drilled holes so i removed the AZGTi saddle and clamped it on the back of the ADM saddle and drilled 4 holes and i now need to go the the bolt shop on Monday and get the correct length bolts then countersink the holes,,,,,easy-peasy.
Al
|