Thread: [NOT REQUIRED] Pyrex discs 5" and 10"
View Single Post
  #6  
Old 14-10-2019, 11:54 AM
JohnF (John)
Registered User

JohnF is offline
 
Join Date: Oct 2018
Location: Nimbin NSW Australia
Posts: 265
Quote:
Originally Posted by Stefan Buda View Post
Hi John,

Have a look at the colour of the disc from the side. If it is greenish then it is plate glass if it is a bit yellow then it is most likely Pyrex.

Also I can re-coat your secondary but, when adding on the postage, it would cost as much as buying a new one.

Cheers,
Stefan
It is 45MM thick. And it has some white inclusions in the glass -- think it was cast in that glass. Will look for any other colour.

Quote:
Originally Posted by Stefan Buda View Post
Hi John,

Have a look at the colour of the disc from the side. If it is greenish then it is plate glass if it is a bit yellow then it is most likely Pyrex.

Also I can re-coat your secondary but, when adding on the postage, it would cost as much as buying a new one.

Cheers,
Stefan
If all else fails, will redcoat in silver -- Tollen's test for Aldehyde

-- https://www.youtube.com/watch?v=D1_-Xc2SpyE

Last edited by RB; 14-10-2019 at 12:21 PM.