I bought a small pump and controller off eBay. I have a 25 litre container and pipes to carry the water to the block that screws onto the back of the QSI.
Turn off the fans on the camera and turn on the pump. Mine only wants a very slow flow of water (2 gallons per hour???), but other than creating vibration, I can't see a problem with faster flow.
Charles - if your cooling water is below the dew point, the back of the camera could be cooled below the dew point causing condensation to form - water and electronics don't mix. There are posts on page three of the thread that talk about corrosion forming on the PCBs if wet.
DT
|