View Single Post
  #1  
Old 02-10-2017, 03:23 PM
blinky's Avatar
blinky (Leigh)
Registered User

blinky is offline
 
Join Date: Jul 2015
Location: Geelong
Posts: 102
just finished my first bino-chair

Hello, just wanted to share my version of bino-chair as inspired by the starrocker made by Don M which i found on the cloudy nights forums.
here is the link to the star rocker https://www.cloudyni...r/#entry3001251

I tried to use as much recycled materials as possible in this project. The only thing i bought new was some nuts and bolts, a chair swivel bearing assembly and an extra bit of ply for the base. Most of the plywood I got from a carpet store who had decent quality plywood pallets they wanted to get rid of. I am an upholsterer by trade and was able to gather used webbing, foam and excess vinyl from various re-upholstery jobs i had done. I think the total cost was about $60 bucks.

hope it gives you ideas!

Leigh
Attached Thumbnails
Click for full-size image (20170921_210052.jpg)
204.5 KB189 views
Click for full-size image (20170929_164657.jpg)
202.5 KB169 views
Click for full-size image (20170930_180841.jpg)
211.6 KB199 views
Click for full-size image (20170930_182049.jpg)
207.4 KB163 views
Click for full-size image (20170930_182133.jpg)
202.6 KB179 views
Reply With Quote