View Single Post
  #3  
Old 13-07-2017, 08:53 AM
Tinderboxsky's Avatar
Tinderboxsky (Steve)
I can see clearly now ...

Tinderboxsky is offline
 
Join Date: Feb 2012
Location: Tinderbox TAS
Posts: 575
Perhaps a fine brass sleeve with a small cut in it that allows you to expand it slightly to push it down the barrel and it then contracts into place in the cut out. The brass sleeves used in eyepiece holders would be close in size.
If the eyepieces were keepers, I would fire up the lathe and make new barrels.
Reply With Quote