DSRL Imaging issue
So i Finally set up my gear (HEQ5 pro, Skywatcher Black Diamond ED80 with a Canon EOS 60D). Had everything set up and was observing the stars as per normal through the eye piece.
Fast forward 30 minutes and I finally decide to connect up my canon EOS 60D through a T-ring and adaptor and when I took a test 10 sec exposure the screen came out pitch black. I up'd the ISO to 3200 just to see if I could get anything and did the same thing and the same issue occured. I then removed the camera and checked the live view inside my house and was able to see what the camera was pointing at.
I went back outside and re-attached it to my gear, and again, even through live-view the screen was completely black. (Using Bulb mode). I also have the option turned on that allows the shutter to go off when there is no lens attached.
Is there something I am missing?
|