View Single Post
  #37  
Old 25-06-2016, 08:44 AM
wasyoungonce's Avatar
wasyoungonce (Brendan)
Certified Village Idiot

wasyoungonce is offline
 
Join Date: Jul 2006
Location: Mexico city (Melb), Australia
Posts: 2,336
I got the BOM from Cam85 and went thru the related posts in the forum as well as reviewing the PCB image he posted. I tracked his changes about the only questionable part I have identifying is Dr4, an 0805 inductor, I think it's ~1.5uh. There are minor errors on his PCB. He has 2 "C11's". One an electro one an 0805 cap. These are minor errors though. But to fully check I need to complete my own PCB CAD of Cam85m.

I have the rest of the Cam85m BOM pretty much done (see attached) except the small 0805 sized capacitor and resistors, they are common items no need to chase after atm.

The case G106 is a Gainta case. All info on it is here. Because he used the 106 case, height and size of component is critical. That said I calculated that we have an available clearance of 13mm (absolute max) so 11mm height electrolytic caps would be ok.

About the only "machining" part needed is the nose piece adaptor. Funny you should mention "printed parts"...he use some in his case parts design.
Attached Files
File Type: zip cam85m.zip (12.6 KB, 163 views)
Reply With Quote