|
Paul,
For other reasons (fitting the spectroscope in the forks) I moved the 10" Lx onto the NEQ6pro. (I did think about doing the same with the 12" lx but at >17Kg bare, it was IMO tooooo much for the mount!)
The C9.25 is a great instrument.
Sits nicely on the HEQ5 and even better on the NEQ6.
Your issue seems to be using the GOTO as well as slipped clutch manual movement??
I can only say if you go down the EQMod route you can effectively do both! If you know where you are looking (manual select..) then just use say CdC to sync on the object...you can then GOTO any other object...
|