|
Here is a photo of my M48 spacer that I rigged up for the ASi1600, notice the depth of the thread on the inside - that is 10mm deep, and will easily take the male M48 of the 3" Photoline. So all you need to worry about it the overall length of your combo M48 spacer. You can see that I put mine together from several M48 sections and a M48-to M42 step down to screw into the filter wheel housing - this is pretty much the same way I do it with the Nikon D5300, the overall length of the M48 section is just a little different.
|