Quote:
Originally Posted by Maurice
Hi Allan
I think that you'll find that the detector is covered over with a windowed cap that is somewhat 'sealed' against the PCB (I think it has an o-ring underneath). The electronics are not sealed to the outside world..
regards
Maurice
|
Yes - that's true,
Inside that area - it will have argon gas to stop moisture building up.
In some ways the electronics on the PCBs should be sealed too.
It would be easy enough to do with some Dow Corning 738 white non-acidic silicon.
I may consider that when Ive proven I've fixed the black line problem.
cheers
Allan