View Single Post
  #1  
Old 26-08-2011, 10:46 PM
WingnutR32 (Sam)
Registered User

WingnutR32 is offline
 
Join Date: Jul 2011
Location: Canberra, Australia
Posts: 283
Not impressed with my nights efforts

Finally felt well enough after being sick for the last 3 weeks to get out the scope and test out the QHY9-M for the very first time.

I wanted my polar alignment to be the best I could possibly get, so used PHD to 'guide' unguided so I can watch the history line graph. Needless to say, this took me near on 2 hours to get right due to second guessing myself on which way to turn the dials.

I finally got the alignment near perfect so I started to do an multi star alignment through SNP6 with EQMOD. I slewed to, aligned and synced with 18 different stars because I was so amazed at how close each slew was (never been so dead on like this before, thank you good polar alignment and level ground).

This is where things went from bad to worse. I suddenly realised that I forgot to tick the 'Append on Sync' check box inside EQMOD, so I ended up with NO alignment stars out of all 18.

Started to get very tired and grumpy, so thought, bugger it. I really want to take at least ONE image with the QHY9. So I connected all the camera equipment up, sync'd with Rigel Kent and slewed to NGC 5139.

I was a little off with the slew, so adjusted via EQMOD as usual, except, when I click 'E', the mount didn't stop... It just kept on slewing right past.. I couldn't stop the thing at all. I had to physically switch off the power.

Very random I thought but I was focused on getting an image. So I released the clutches, and re-aligned with the SCP. Turned the mount back on, reconnected to SNP6 and EQMOD and tried again. This time it was ok. It slewed to NGC 5139.

I started guiding on a nearby star with PHD and opened up MaximDL to start the image capturing.

It was now going from worse to just down right demeaning. After MaximDL opened, did the usual "Ctrl-W" -> Setup tab -> Connect via ASCOM

Crash. My laptop had a hissy fit. Didn't blue screen, just locked out any access to any ASCOM driver or program.

So, I decided it really just wasn't my night and packed everything up.

I'm not sure what to take away from this apart from an increase in stress and frustration.

End rant, going to sleep
Reply With Quote