Thread: DIY CCD camera?
View Single Post
  #26  
Old 25-04-2015, 03:42 PM
wasyoungonce's Avatar
wasyoungonce (Brendan)
Certified Village Idiot

wasyoungonce is offline
 
Join Date: Jul 2006
Location: Mexico city (Melb), Australia
Posts: 2,312
Hi Glen

DMSO solvent is available from fleabay and other sources locally: here, $39 250ml spray (99.9% I think); here fleabay, $22 100ml 70% and so forth.

Kits at this stage for PCBs and parts are from $50 USD to $70USD (at this stage). Depends on numbers and finalisation of layout. Camera..well depends you can buy "damage non working units" cheap, but mine was $86 AUD for a working body, fleabay. 70% grade should be ok.

That said...I should get it soon and test it out first. As said, in general a non working camera unit...its 99.9% likely the sensor is ok, just some other electronic or moving part malfunction causing it not to work.

I'll tentatively mark you are interest #1.

Brendan
edit:

Should say the case design is being looked at for a major revision so this is why it won't be starting soon...but it will happen. A proper CNC'd case may be designed up and sold, but this will not be that cheap...price U/K atm but I'd suggest $200~$300 USD (just a guess).

Last edited by wasyoungonce; 25-04-2015 at 03:52 PM.
Reply With Quote