View Single Post
  #4  
Old 11-03-2008, 07:20 PM
Merlin66's Avatar
Merlin66 (Ken)
Spectroscopy Wizard

Merlin66 is offline
 
Join Date: Oct 2005
Location: St Leonards, Vic
Posts: 7,928
Beamsplitter guiding

Without worrying about UV etc a microscope glass slide at 45% will reflect about 8% of the incoming light, this can be used for guiding.
Another option is to use a "proper" beamsplitter ( Surplus Shed is a good starting point) these are usually about 25mm wide and 37mm long and come in various percentage reflection/ transmission ie 70/30 or 50/50 etc.

John H, I'm a little surprised to see the astigmatism see in the web link; beamsplitters are widely used on all sorts of sophisticated optical equipment, so I would have thought the imaging would be very good.

Although I have modified a Meade OAG ( a good starting point as the prism holder is easily removed) and incorporated a beamsplitter ( for guiding my spectroscope) my imaging performance requirements are not as critical as photographic ( I just need to maintain starlight on the slit). Silvio Mete uses a similar system for his cylinderical lens spectroscope.
Setting up and alignment of the beamsplitter is a pain! I had to include 4 X-Y adjusting screws to get mine aligned.
When I can get some observing time I'll take some photos through/ reflected from the beamsplitter and see if I can replicate the astigmatism.
Attached Thumbnails
Click for full-size image (100_0646.jpg)
94.1 KB29 views
Click for full-size image (100_0645.jpg)
81.9 KB32 views
Click for full-size image (100_0644.jpg)
78.0 KB25 views
Reply With Quote