Mario
Brendan has posted a darn good article on his site, for scientific CCD calibration:
http://brendanmitchell.net/?page_id=213
Even with the crappy weather, a perfect time to take darks (not sure that you'll need them with that camera), and offset / bias frames.
I also spent some time looking at cable layouts etc. I ended up putting a metal rod protruding from the back to support the cable connection points.
I also looked for the 'fogging' issue (to be expected with a cooled CCD), and whacked a dew heater strap. Fixed.
Theo was very helpful as well, and gave me some other tips and tricks (insulate the camera to slighly raise the body's temp, use a heater strap, and run it @ -15 ideally).
Logie.