|
I wondered about removing them, all I use them for is putting the mount in the initial parked position on set up. If I don't have any joy getting new clutch discs I will look closer at taking them out. It would depend on if the setting circle rings are deeper than the machined part of the housing they turn on.
I had seen bits of that guide but not the whole thing. You can see on his pics that it was fouling on the RA encoder cover, so this one either had the issue or it was/is going to have it.
Edit: and yes, if I don't have any joy getting spare clutch felts I will look at making my own and make them out of something more resilient, they don't really do much work, even nylon discs would probably do the job of transmitting the torque required.
|